This cute and stunning Jhumkas made up of Blue and Magenta color paper quilling strips and Small white round pearl beads . This jhumka is light-weight and perfectly matching to those who love to be different.
Supplies needed:
- Earring posts and ear backs - 1 pair
- Eye pins - 1 pair
- Paper Strips (desired colors)
- Small round White Pearl Beads
- Small half-round white Pearls – 2 nos.
- 4mm flower shaped Spacer Beads 2 nos.
- Gold plated flat cable chain - 2 inch piece
Tools Needed
- Wire Cutter
- Round Nose Pliers
- Flat Nose Pliers
METHOD
Step 1 :
Keep quilling desired color Quilling strips till you make a tight coil of the desired size to make your Jhumka. Quilling strips of two colors were glued together before quilling the coil. Glue the end so that the coil is secure.
Step 2:
Slide and remove the coil from the slotted tool.
Step 3:
Now gently push the center of the rolled paper upwards in such a way that it brings out a conical shape. Now with the help of the needle tool and your fingers, set the shape (cup shape ) properly. Make sure there is some room in the cone's tip, to insert the eye-pin .
Step 4:
Apply a small amount of fabric glue on the inside of the cup shape and the outside. Allow it to dry. The structure will be secure now.
Step 5:
You can apply clear color nail polish in the cup shape and ear stud base, that will give a glossy shine
Step 6:
Then place one 4mm flower shaped Spacer Bead on top of the cup or cone shaped paper Jhumka and insert the eye-pin on the center of the flower shaped Spacer Bead through the narrow hole of the Jhumka, in such a way that the `eye' sits inside of the cone, and bend the pin's other end from the top of the cone to steady it.
Step 7:
Using round nose pliers make a loop at the top. Use wire cutters to trim off any excess wire after making the loop. Before you close the loop, you can insert a small piece of Gold plated flat cable chain in the loop then close the loop well.
Step 8:
Apply some glue at the end of the cup shape and arrange pearls to it to make it more beautiful. Your Jhumka is ready. Keep it aside.
Step 9:
Now for the stud, take one blue and Magenta paper strips and make a smaller tightly quilled paper coil to make your ear stud. Quilling strips of two colors were glued together before quilling the coil. Glue the end so that the coil is secure. .
Step 10:
Slide and remove the coil from the slotted tool.
Step 11:
Apply a coat of fabric glue and allow it to dry.
Step 12:
Glue a small half-round white Pearl on the center of the coil. Now your ear stud is ready.
Step 13:
Then apply glue on an earring post and attach the back end of the small small coil to the earring post. It has to hold on well and allow it to dry completely.
Step 14
Now insert the other end of Gold plated flat cable chain (one end is attached with the cup shaped paper Jhumka ) in the ear stud post. Advantage of this method of Jhumka making is, you can wear stud alone if you wish or both the stud and hangings together as traditional Jhumkas. (Separating and joining together the ear stud and hanging is easy according to your occasions and dresses).
Step 15:
Repeat above steps for the other earrings piece and make a pair of Paper quilled jhumka earrings.
Comments